77 found, showing page 3 of 6
$43.99
MEDALION INT-LTX FLAT TINT
A paint and primer in 1 product. This ultra premium durable wall paint protects with a 100\% acrylic coating for a lifetime of interior beauty. The flat sheen is perfect for most rooms, providing a smooth, even finish to hide minor surfaceimperfections. Dries to touch in 30 minutes. Covers up to 400 Sq. Ft. per gallon on smooth surfaces. Product uses: Previously painted interior walls, primed sheetrock or plaster, masonry, brick, or primed metal. Cleans up easily with soap and water.
View Details
$12.99
*ALKYD STNBL SPRAY PRIMER
An all-purpose alkyd (oil-base) primer-sealer that seals porous surfaces, adheres to glossy surfaces and covers most stains. Dries to touch in 1 hour to a flat white that can be top coated in 2 hours. Helps prevent cedar and redwood bleed through. Can be tinted. Clean up with mineral spirits/paint thinner. 13 Oz. spray is handy for small jobs, spot priming on hard-to-reach areas. Covers approximately 20 Sq. Ft.
View Details
$39.99
ALKYD WHT STNBLK PRIMER
An all-purpose alkyd (oil-base) primer-sealer that seals porous surfaces, adheres to glossy surfaces and covers most stains. Dries to touch in 1 hour to a flat white that can be top coated in 2 hours. Helps prevent cedar and redwood bleed through. Can be tinted. Clean up with mineral spirits/paint thinner.
View Details
$39.99
KILZ INT ODORLESS PRIMER********
An odorless oil base is a powerful interior stain blocker with no lingering odor. Offering traditional oil-base performance, this product is ideal for stain blocking in areas where high odor levels are prohibitive. Blocks severe stains and odors (smoke/fire). Seals pet, nicotine and smoke odors. Bright white and non-yellowing. No lingering odor. Stains: severe smoke and water. Odors: pet, nicotine and smoke. Use on: furniture, woodwork, paneling, wall-paper, masonry, brick and painted metal. Dries to Touch: 30 Minutes - Topcoat: 1 hour.
View Details
$21.99
EXT FLT BRIGHT WHT PAINT
Our new exterior paint is formulated with 100\% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors.It is resistant to fading, peeling and blistering, and covers with 1 coat when applied over properly prepared surfaces.Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, roller, paint pad or sprayer. May be thinned slightly for spray application. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.
View Details
$44.99
DIB EXT FLAT BRIGHT WHT PAINT
Our new exterior paint is formulated with 100\% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. It is resistant to fading, peeling and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, roller, paint pad or sprayer. May be thinned slightly for spray application. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.
View Details
$214.99
DIB EXT FLAT BRIGHT WHT PAINT
Our new exterior paint is formulated with 100\% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. It is resistant to fading, peeling and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, roller, paint pad or sprayer. May be thinned slightly for spray application. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.
View Details
$43.99
DIB EXT-LTX PAINT&PRMR SATIN WHT
Our new exterior paint is formulated with 100\% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors.It is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. May be thinnedslightly for spray application. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.
View Details
$209.99
DIB EXT-LTX PAINT&PRMR SATIN WHT
Our new exterior paint is formulated with 100\% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors.It is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. May be thinnedslightly for spray application. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.
View Details
$31.99
LTX TRAFFIC PAINT HC BLUE
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$159.99
KILZ 3 INT/EXT LTX PRIMR
A superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stain blocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating. High hide formula / blocks previous colors and medium stains. Seals surfaces for uniform finish. Stains: Water, tannin, ink, pencil, felt-marker and grease. Use on: Wood, non ferrous metals, cured plaster, wallpaper, masonry, concrete block/CMU, Vinyl/PVC, fiberglass, and under or over latex or oil based paint.
View Details
$31.99
LATEX CURB PAINT RED
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$154.99
WHT LATEX MARKING PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$26.99
KILZ 2 INT/EX LTX PRIMER
A fast drying, water-base multi-surface primer-sealer-stain blocker with excellent adhesion, sealing properties and very mild odor. KILZ 2 latex primer also blocks most light stains and provides a mildew resistant coating. Hides previous colors well. Good adhesion and sealer. Stains: water, rust, grease, ink, pencil and felt marker. Use on: Interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick, architectural plastics, and non ferrous metals.
View Details
$13.99
KILZ 2 INT/EX LTX PRIMER
A fast drying, water-base multi-surface primer-sealer-stain blocker with excellent adhesion, sealing properties and very mild odor. KILZ 2 latex primer also blocks most light stains and provides a mildew resistant coating. Hides previous colors well. Good adhesion and sealer. Stains: water, rust, grease, ink, pencil and felt marker. Use on: Interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick, architectural plastics, and non ferrous metals.
View Details
